400G Switch for Hyperscale Datacenters
The next generation of network, 5G, is driven by growing number of network devices. With increasing bandwidth demands from emerging 5G, T9032-IX9 is designed to address hyper-scale cloud environments.
QuantaMesh T9032-IX9 is the first 400G capable switch in the QuantaMesh BMS product line. T9032-IX9 is a 32 port QSFPDD switch, each port supports 400/200/100GbE or via breakout cables 4 x 100 GbE or 4 x 25 GbE. That's a total of 128 x 100G QSFP28+ ports.
It is equipped with BMC in a 1RU form factor with an overall throughput of 25.6Tbps.
T9032-IX9 offers a throughput of 25.6Tbps, 700ns low latency at high power efficiency, and a 64MB large packet buffer, allowing heavily loaded network to be absorbed. By levering merchant silicon chip, T9032-IX9 is allowed to perform high-speed, low- latency with advanced features such as smart table, dynamic load balancing, and VxLAN/RIOT support.
High Availability
- 1+1 hot-swappable power supplies
- 5+1 redundant, hot swappable fan modules
- Color coded fan module to indicate airflow direction
- ONIE pre-loaded to support open source
Physical ports | |
---|---|
Port configuration | 32 QSFP-DD ports support for 10/25/40/50/100/400GbE
|
Management Port | 1 RJ-45 out-of-band management port (10/100/1000M)
|
Console Port | 1 RJ-45 console port
|
USB | 1 USB 2.0 port
|
Performance | |
---|---|
Switching capacity | 25.6Tbps
|
Maximum forwarding rate | 8B PPS
|
Latency | 700 ns
|
MAC | 8K to 64K
|
Major Components | |
---|---|
ASIC | Broadcom Tomahawk3 BCM56980
|
CPU | Intel x86
|
Memory | 32GB DDR4 SDRAM
|
Storage | 128GB M.2
|
Packet buffer | 64MB
|
BMC | |
---|---|
IPMI | v1.5/v2.0 compliance
|
Serial over LAN | |
SNMP | |
SMASH | |
HTTPS | |
Health status and hardware monitoring | |
Event log | |
PEF and PET | |
Chassis management | |
Watchdog and system re-start |
High Availability | |
---|---|
Redundant power supply | 1+1
|
Hot-swappable fan tray | 5+1
|
Mechanical | |
---|---|
Dimension (HxWxD) | 43.2x440x620mm
|
Weight | 13.37kg(NET)
|
Environmental Specifications | |
---|---|
Operating temperature | 0~45°C
|
Operating humidity | 90% maximum relative humidity
|
Operating Altitude | 0 to 2952 ft, (0-900m)
|
Electrical | |
---|---|
Power requirement | 100~240VAC, 50/60Hz
|
Power consumption | 1600W
|
Safety | |
---|---|
Safety | UL, cUL, CB, CCC, VCCI
|
EMC | |
---|---|
EMC | CE, FCC, VCCI, CCC
|
Supported Optics and Cables | |
---|---|
Supported Optics and Cables | DAC cable (QSFP+): 1m, 3m, and 5m
DAC cable (QSFP+, fan-out): 1m, 3m, and 5m DAC cable (QSFP28): 1m, 3m, and 5m DAC cable (QSFP28, fan-out): 3m DAC cable (SFP28): 1m, 3m and 5m DAC cable (QSFP-DD): 0.5-3m AOC cable (QSFP+, 850nm, MMF): 7m and 10m AOC cable (QSFP28, 850m, MMF): 1m, 3m, 5m, and 10m AOC cable (SFP28, 850nm, MMF): 1m, 3m and 5m AOC cable (QSFP-DD): 3m ACC cable (QSFP-DD, fan-out): 3m 10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR 10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR 25G optic (SFP28, LC, 850nm, MMF): 25GBASE-SR 40G optic (QSFP+, MPO, 850nm, MMF): 40GBASE-SR4 40G optic (QSFP+, LC, 1310nm, SMF): 40GBASE-LR4 100G optic (QSFP28, MPO, 850nm, MMF): 100GBASE-SR4 100G optic (QSFP28, MPO, 1310nm, SMF): 100GBASE-PSM4 100G optic (QSFP28, LC, 1310nm, SMF): 100GBASE-LR4 400G optic (QSFP-DD, MPO, 850nm, MMF): 400GBASE-SR4 400G optic (QSFP-DD, LC, 1310nm, SMF): 400GBASE-FR4 400G optic (QSFP-DD, LC, 1310nm, SMF): 400GBASE-LR4 |
Order Information | |
---|---|
Order Information | T9032-IX9 (1IX9UZZ0000) BDE-QCT(C2.2G) ACFB R16*2
|
Title | Version | Date | Size | |
---|---|---|---|---|
IX9 Datasheet | 1 | 1 | 542KB |
Title | Version | Date | Size | |
---|---|---|---|---|
HS Product Catalog | 1 | 01-10-20 | 6371KB |
Title | Version | Date | Size | |
---|---|---|---|---|
IX9 UM | 1 | 01-10-20 | 2609KB |
BMS T9032-IX9
The 400G switch for Hyper Scale Data Center
- ONIE Pre-loaded - Bare Metal Switch
- x86 CPU Board
- BMC Built-in
- SONiC Ready
-
$USD $15,800.00
*RRP Pricing*To View Channel Discounts Please Login