QuantaMesh 3000 Series T3048-LY9
A powerful Top-of-Rack Switch for Cloud Datacenters
Automation
Virtualization
High Availability
About QCT
| Physical ports | |
|---|---|
| Port configuration | 48 100/1000/10GBASE-T and 6 QSFP+ ports |
| Management Port | Out-of-band management port (RJ-45, 10/100/1000Base-T) |
| Console Port | 1 (RJ-45) |
| USB | 1 (v2.0) |
| Performance | |
|---|---|
| Switching capacity | 1.44Tbps |
| Maximum forwarding rate | 1071Mpps |
| Latency | <3us |
| Major Components | |
|---|---|
| ASIC | Broadcom StrataXGS Trident2 |
| CPU | PPC P2020 |
| Memory | 2GB DDR3/ECC |
| Flash | 128MB |
| Storage | 8GB Micro SD |
| Layer 2 Features | |
|---|---|
| Switching Mode | Store-and-Forward |
| Spanning Tree | 802.1w 802.1s Auto Edge |
| VLAN | IEEE 802.1Q Tagged Base Port-Based QinQ (802.1ad) |
| Storm Control | Broadcast Unknown Multicast DLF (Unknown Unicast) |
| IGMP Snooping | v1/v2/v3 v1/v2 Querier Immediate Leave |
| Link Aggregation | 802.3ad with LACP Static Trunk Unicast/Multicast Traffic Balance over Trunking Port LACP Fallback |
| Link State | |
| Port Backup | |
| Loopback Detection | |
| Private VLAN | |
| QoS Features | |
|---|---|
| Scheduling for priority queue | WRR Strict Hybrid |
| COS | 802.1p IP TOS precedence DSCP |
| DiffServ | |
| iSCSI optimization | |
| Security Features | |
|---|---|
| Static and dynamic port security (MAC-based) | |
| 802.1x | Port-based MAC-based Auto VLAN assignment Guest VLAN Unauthenticated VLAN |
| Access Control List | L2/L3/L4 |
| IPv6 ACL | L3/L4 |
| RADIUS | Authentication, Authorization, Accounting |
| TACACS+ | Authentication |
| SSH 1.5/V2.0 | |
| User name and password | Local Authentication Remote Authentication via RADIUS/TACACS+, AAA |
| Management IP filtering | SNMP Telnet SSH |
| IP Source Guard | |
| Dynamic ARP inspection (DAI) | |
| DHCP snooping | IPv4 IPv6 |
| Control Plane Policing / CoPP | |
| Service Prohibit Access | |
| Role Base Access Control (RBAC) | |
| Layer 3 Features | |
|---|---|
| IP Multinetting/CIDR | |
| /31 subnets | |
| Proxy ARP | |
| Static route | IPv4 IPv6 |
| OSPF v2/v3 | |
| ECMP | |
| BGP4 | |
| IGMP v1/v2/v3 | |
| PIM-SM/-SM6 | |
| MLD v1/v2 | |
| VRRP v2 | |
| Policy-Based Routing (PBR) | |
| BFD | |
| VRF Lite | |
| Management Features | |
|---|---|
| Industrial standard command-line interface | |
| CLI filtering | |
| CLI schedule | |
| Telenet/SSH | |
| Software Update | TFTP FTP SCP SFTP |
| Configuration Update | TFTP FTP SCP SFTP |
| Dual Images | |
| SNMP v1/v2c/v3 | |
| SNMP inform v2 | |
| RMON1 Groups: 1, 2, 3 & 9 | |
| BOOTP | client/relay |
| DHCP client | |
| DHCP relay | |
| DNS client | |
| DNS relay | |
| Remote PING | |
| Traceroute | |
| NTPv4 | |
| LLDP | 802.1ab 802.MED Potential error detection |
| UDLD | |
| Port mirroring | SPAN RSPAN |
| sFlow v5 | |
| Email alerting | SMTP |
| Error-Disable Recovery | |
| Fluentd | |
| IPv6 Management | |
|---|---|
| IPv4/IPv6 Dual Protocol Stack | |
| ICMPv6 | |
| ICMPv6 Redirect | |
| IPv6 Neighbor Discovery | |
| Stateless Autoconfiguration | |
| Manual Configuration | |
| DHCPv6 | |
| SNMP over IPv6 | |
| SSH over IPv6 | |
| IPv6 Telnet Support | |
| IPv6 DNS Resolver | |
| IPv6 RADIUS Support | |
| IPv6 TACACS+ Support | |
| IPv6 Syslog Support | |
| IPv6 SNTP Support | |
| IPv6 TFTP Support | |
| High Availability | |
|---|---|
| Multi-Chassis Link Aggregation (MLAG) | |
| Data Center Features | |
|---|---|
| Enhanced Transmission Selection (802.1Qaz) | |
| Priority-based Flow Control (802.1Qbb) | |
| DCBX | DCBX for ETS DCBX for PFC |
| FCoE Initiation Protocol (FIP) snooping | |
| Automation | |
|---|---|
| Auto installation | |
| RESTful API | |
| Ansible | |
| Pooled System Management Engine (PSME) | |
| Virtualization Features | |
|---|---|
| VXLAN | |
| SDN | |
|---|---|
| OpenFlow | v1.3 |
| Mechanical | |
|---|---|
| Dimension (HxWxD) | 44x435x508mm |
| Weight | 9.6kg/21.16lbs (NET) |
| Environmental Specifications | |
|---|---|
| Operating temperature | 0~45°C |
| Operating humidity | 90% maximum relative humidity |
| Electrical | |
|---|---|
| Power requirement | 100-127VAC; 200-240VAC, 50/60Hz |
| Power consumption | 330 watts (tested with optics and Cat 6A with 100% loading, AC input) |
| Safety | |
|---|---|
| Safety | UL, cUL, CB, BSMI, CCC |
| EMC | |
|---|---|
| EMC | CE, FCC, VCCI, CCC, RCM |
| RoHS | |
|---|---|
| RoHS | Reduction of Hazardous Substances (RoHS) 6 |
| Supported Optics and Cables | |
|---|---|
| Supported Optics and Cables | 1000BASE-T: Cat 5e and Cat 6A (100m/330 ft) 10GBAE-T: Cat 6A (100m/330ft) DAC cable (QSFP+): 1m, 3m, and 5m DAC cable (QSFP+, fan-out): 1m, 3m, and 5m AOC cable (QSFP+, 850nm, MMF): 7m, 10m, and 20m 40G optic (QSFP+, MPO, 850nm, MMF): 40GBASE-SR4 40G optic (QSFP+, LC, 1310nm, SMF): 40GBASE-LR4 |
| Order Information | |
|---|---|
| Order Information | T3048-LY9 (1LY9BZZ0ST6) (F-2-B, AC, P2020, with rail kit included) T3048-LY9 (1LY9BZZ0ST7) (B-2-F, AC, P2020, with rail kit included) PSU - Red (1HY9ZZZ0336) (F-2-B, AC, 750W) PSU - Blue (1HY9ZZZ0337) (B-2-F, AC 750W) FAN Module (1HY9ZZZ022X) (F-2-B, Red) FAN Module (1HY9ZZZ022Y) (B-2-F, Blue) |
| Title | Version | Date | Size | |
|---|---|---|---|---|
| HS Product Catalog | 1 | 01-10-20 | 6371KB | ![]() |
| Title | Version | Date | Size | |
|---|---|---|---|---|
| QCT Product Portfolio | v5.0 | 2015/06/18 | 271.97KB | ![]() |
| QuantaMesh T3048-LY9 | v2 | 2015/03/27 | 51.37KB | ![]() |
| Title | Version | Date | Size | |
|---|---|---|---|---|
| QuantaMesh Installation Guide | 2015/07/02 | 6.33MB | ![]() |
|
| QuantaMesh Switch User Guide | 1 | 2015/03/30 | 5.66MB | ![]() |
| Title | Version | Date | Size | |
|---|---|---|---|---|
| LY6_LY8_LY9 P2020 image | 2.4.02.00 | 2015/02/17 | 19.65MB | ![]() |
| LY6_LY8_LY9 x86 image | 2.4.02.00 | 2015/02/17 | 30.74MB | ![]() |
T3048-LY9
A Powerful Spine/Leaf Switch for Datacenter and Cloud Computing
- 10GBT
- x86 CPU Board Support
- MLAG, OSPF, BGP4, ECMP
- VXLAN/NVGRE
- OpenFlow Support
- OpEN API
-
$USD $6,900.00
*RRP Pricing*To View Channel Discounts Please Login

AUS site










