T1048-LB9A

QuantaMesh 1000 Series T1048-LB9A 1G/10G Enterprise-Class Ethernet switch The QuantaMesh T1048-LB9A is a high performance layer 2/3/4 Ethernet switch with 48 10Base-T/100Base-TX/1000Base-T ports and 4 dual

QuantaMesh 1000 Series T1048-LB9A

1G/10G Enterprise-Class Ethernet switch

The QuantaMesh T1048-LB9A is a high performance layer 2/3/4 Ethernet switch with 48 10Base-T/100Base-TX/1000Base-T ports and 4 dual speed 1GbE/10GbE SFP+ ports in a compact rack unit size.

Simplicity

The QuantaMesh T1048-LB9A can be managed through industry-standard command-line Interface (CLI) which reduces the training and operating costs. A user friendly Web GUI is provided via a standard Web browser for switch management. The QuantaMesh T1048-LB9A also supports Simple Network Management Protocol (SNMP) both from standard MIB and private MIB to help network administrators easily configure, monitor, and manage operation remotely. The Auto-Installation feature implemented in the QuantaMesh T1048-LB9A helps centralized management to simplify deployment of a truly plug-and-play experience. With the evolution from IPv4 to IPv6, the QuantaMesh T1048-LB9A is a IPv6 integrated management device.

High Availability

The QuantaMesh T1048-LB9A is designed for high availability from both hardware and software perspective. The key features include:

  • Out-of-band management supported
  • 802.1D, 802.1w, and 802.1s supported
  • Up to 8 ports per link aggregation group (LACP) and up to 64 groups
  • Multi-chassis LAG for preventing the risks of single point failure
  • Up to 32 paths ECMP routing for load balancing and redundancy
  • Virtual Router Redundancy Protocol supported

High-Performance L2/L3 access deployments

With the compact 1U form factor, high density 48 gigabit ports and 4 dual speed 1GbE/10GbE uplink ports, the QuantaMesh T1048-LB9A is ideal for enterprise campus application. The 176Gbps switching capacity and 131Mpps forwarding rate ensures high bandwidth connectivity to the aggregation or core layers and low power consumption ensure make the QuantaMesh T1048-LB9A a powerful solution to aggregate data traffic and high-performance servers. The 4-port 10GbE density in a 1U height switch provides near 1:1 subscription ratio throughout the network. This brings the benefits to organizations to deploy highly utilized networks and avoid congestion during peak hours.

Advanced IPv4 and IPv6 routing

The QuantaMesh T1048-LB9A is a fully layer 2 and layer 3 routing switch that supports advanced IPv4 and IPv6 routing features such as RIP v1/v2, OSPF, ECMP, RIPng and OSPFv3. The multicast routing features for IGMP v1/v2/v3, DVMRP, PIM-DM/SM, MLD v1/v2 and PIM-DM6/SM6 are all supported in the QuantaMesh T1048-LB9A.

About QCT

QCT (Quanta Cloud Technology) is a global datacenter solution provider extending the power of hyperscale datacenter design in standard and open SKUs to all datacenter customers.  Product lines include servers, storage, network switches, integrated rack systems and cloud solutions, all delivering hyperscale efficiency, scalability, reliability, manageability, serviceability and optimized performance for each workload.  QCT offers a full spectrum of datacenter products and services from engineering, integration and optimization to global supply chain support, all under one roof.  The parent of QCT is Quanta Computer Inc., a Fortune Global 500 technology engineering and manufacturing company. 

  • BSMI--Taiwan--EMISafety
  • CB-EU
  • CCC-China
  • CE-EU
  • cUL (Canada) (Safety)
  • FCC-ClassA-US
  • RCM(AustraliaNew Zealand)
  • RoHS
  • VCCI-classA-Japan この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されることがあります
  • WEEE-Mark
Physical ports
Port configuration
48 10/100/1000BASE-T and 4 10/25GbE SFP28 ports
Management Port
Out-of-band management port (RJ-45, 10/100/1000Base-T)
Console Port
1 (RJ-45)
Performance
Switching capacity
296Gbps
Maximum forwarding rate
220Mpps
Major Components
ASIC
Broadcom StrataXGS Hurricane3-MG
CPU
Embedded ARM A9 1.25GHz
Memory
2GB DDR4 SDRAM
Flash
128MB
Storage
8GB SD
Layer 2 Features
Switching Mode
Store-and-Forward
Spanning Tree
802.1w
802.1s
Auto Edge
VLAN
IEEE 802.1Q Tagged Base
Storm Control
Broadcast
Unknown Multicast
DLF (Unknown Unicast)
Link Aggregation
802.3ad with LACP
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback
QoS Features
Scheduling for priority queue
WRR, Strict, Hybrid
COS
802.1p
IP TOS precedence
DSCP
DiffServ
Security Features
Static and dynamic port security (MAC-based)
802.1x
MAC-based
Port-based
Auto VLAN assignment
Guest VLAN
Unauthenticated VLAN
MAC Bypass
Authenticator
Access Control List
L2/L3/L4
IPv6 ACL
L3/L4
RADIUS
Authentication
Accounting
TACACS+
Authentication
Accounting
User name and password
Local Authentication
Remote Authentication via RADIUS/TACACS+
AAA
Management IP filtering
SNMP
Telnet
SSH
IP Source Guard
1K
Dynamic ARP inspection (DAI)
DHCP snooping
IPv4
IPv6
Control Plane Policing / CoPP
Service Prohibit Access
Role Base Access Control (RBAC)
Layer 3 Features
IP Multinetting/CIDR
/31 subnets
Proxy ARP
Static route
OSPF v2/v3
ECMP
BGP4
VRRP v2
Active-Active Mode w/MLAG
Policy-Based Routing (PBR)
PBR
ECMP support
VRF Lite
Static
OSPF
Management Features
Industrial standard command-line interface
CLI filtering
Telenet/SSH
Software Update
TFTP
FTP
SCP
SFTP
Configuration Update
TFTP
FTP
SCP
SFTP
Dual Images
SNMP v1/v2c/v3
SNMP inform v2
RMON1 Groups: 1, 2, 3 & 9
BOOTP
relay
DHCP client
DHCP relay
DNS client
DNS relay
Remote PING
Traceroute
NTPv4
LLDP
802.1ab
802.MED
Potential error detection
UDLD
Port mirroring
SPAN
RSPAN
ERSPAN
sFlow v5
Email alerting
SMTP
Auto Install
Error-Disable Recovery
Fluentd
IPv6 Management
IPv4/IPv6 Dual Protocol Stack
ICMPv6
ICMPv6 Redirect
IPv6 Neighbor Discovery
Stateless Autoconfiguration
Manual Configuration
DHCPv6
Client/Relay
SNMP over IPv6
SSH over IPv6
IPv6 Telnet Support
IPv6 DNS Resolver
IPv6 RADIUS Support
IPv6 TACACS+ Support
IPv6 Syslog Support
IPv6 SNTP Support
IPv6 TFTP Support
SDN
Open API
OpenFlow
Mechanical
Dimension (HxWxD)
43.2x440x394mm
Weight
5.8kg/12.78lbs (NET)
Environmental Specifications
Operating temperature
0~45°C@altitude:up to 900m
0~40°C@altitude:up to 3048m
Operating humidity
90% maximum relative humidity
Electrical
Power requirement
100~240VAC, 50/60Hz
Power consumption
62 watts (stress mode)
50 watts (typical mode)
Safety
Safety
UL, cUL, CB, CCC
EMC
EMC
CE, FCC, VCCI, CCC
RoHS
RoHS
Reduction of Hazardous Substances (RoHS) 6
Supported Optics and Cables
Supported Optics and Cables
DAC cable (SFP+): 1m, 3m, and 5m
DAC cable (SFP28): 1m, 3m and 5m
AOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m
AOC cable (SFP28, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m
10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic
10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic
25G optic (SFP28, LC, 850nm, MMF): 25GBASE-SR
Order Information
Order Information
T1048-LB9M (1LB9BZZ000Q) (F-2-B,AC)
T1048-LB9M (1LB9BZZ000P) (B-2-F,AC)

 

CATALOGUE 1
Title Version Date Size
HS Product Catalog 1 01-10-20 6371KB
Datasheet 2
Title Version Date Size
QCT Product Portfolio v5.0 2015/06/18 271.97KB
QuantaMesh T1048-LB9A v1 2014/06/17 52KB
User manual 1
Title Version Date Size
QuantaMesh Switch User Guide 1 2014/10/31 13.36MB
Safety information 5
Title Version Date Size
Safety Information_EN for UL 2014/06/18 295KB
Safety Information_French for CUL. 2014/06/18 404KB
Safety Information_Russian_Language v1 2014/06/18 556KB
Safety Information_Simplify Chinese for CCC. 2014/06/18 756KB
Safety Information_Tranditional Chinese for BSMI. 2014/06/18 619KB
Supported Switch OS 1
Title Version Date Size
LB9A v1.4.17.00 image 1.4.17.00 2015/03/12 18.82MB

T1048-LB9A

1G/10G Enterprise-Class Ethernet switch

  • MLAG, OSPF, BGP4, ECMP
  • OpenFlow Ready
  • Network Automation
  • $USD $2,585.00

    *RRP Pricing*

    To View Channel Discounts Please Login


System Configurator


Tags: T1048-LB9A