QuantaMesh T1048-LB9

QuantaMesh 1000 Series T1048-LB9 1G/10G Datacenter & Enterprise-Class Ethernet switch The QuantaMesh T1048-LB9 is a high performance layer 2/3/4 Ethernet switch with 48 10Base-T/100Base-TX/1000Base-T ports an

QuantaMesh 1000 Series T1048-LB9

1G/10G Datacenter & Enterprise-Class Ethernet switch

The QuantaMesh T1048-LB9 is a high performance layer 2/3/4 Ethernet switch with 48 10Base-T/100Base-TX/1000Base-T ports and 4 dual speed 1GbE/10GbE SFP+ ports in a compact rack unit size.

Simplicity

The QuantaMesh T1048-LB9 can be managed through an industry standard command-line Interface (CLI) which reduces training and operating costs. A user friendly Web GUI is provided via a standard Web browser for switch management. The QuantaMesh T1048-LB9 also supports Simple Network Management Protocol (SNMP) both from standard MIB and private MIB for network administrator to easily configure, monitor, and manage operation remotely. The Auto-Installation feature implemented in the QuantaMesh T1048-LB9 helps centralized management to simplify deployment of a truly plug-and-play experience. With the evolution from IPv4 to IPv6, the QuantaMesh T1048-LB9 is a IPv6 integrated management device.

High Availability

The QuantaMesh T1048-LB9 is designed for high availability from both hardware and software perspective. The key features include:

  • 1+1 hot-swappable power supplies
  • Out-of-band management supported
  • 802.1D, 802.1w, and 802.1s supported
  • Up to 8 ports per link aggregation group (LACP) and up to 64 groups
  • Multi-chassis LAG for preventing the risks of single point failure
  • Up to 32 paths ECMP routing for load balancing and redundancy
  • Virtual Router Redundancy Protocol supported

High-Performance L2/L3 access deployments

With features like: 1) a compact 1U form factor, 2) high density 48 gigabit ports and 4 dual speed 1GbE/10GbE uplink ports, and 3) front to back and/or back to front airflow design, the QuantaMesh T1048-LB9 is ideal for enterprise campus or top-of-rack deployments. The 176Gbps switching capacity and 131Mpps forwarding rate enables high bandwidth connectivity to the aggregation or core layers and low power consumption make the QuantaMesh T1048-LB9 a powerful solution to aggregate data traffic and high-performance servers. The 4-port 10GbE density in a 1U height switch provides near 1:1 subscription ratio throughout the network. This allows organizations to deploy highly utilized networks and avoid congestion during peak hours.

Advanced IPv4 and IPv6 routing

The QuantaMesh T1048-LB9 is a fully layer 2 and layer 3 routing switch that supports advanced IPv4 and IPv6 routing features such as RIP v1/v2, OSPF, ECMP, RIPng and OSPFv3. The multicast routing features for IGMP v1/v2/v3, DVMRP, PIM-DM/SM, MLD v1/v2 and PIM-DM6/SM6 are all supported in the QuantaMesh T1048-LB9.

About QCT

QCT (Quanta Cloud Technology) is a global datacenter solution provider extending the power of hyperscale datacenter design in standard and open SKUs to all datacenter customers.  Product lines include servers, storage, network switches, integrated rack systems and cloud solutions, all delivering hyperscale efficiency, scalability, reliability, manageability, serviceability and optimized performance for each workload.  QCT offers a full spectrum of datacenter products and services from engineering, integration and optimization to global supply chain support, all under one roof.  The parent of QCT is Quanta Computer Inc., a Fortune Global 500 technology engineering and manufacturing company.

MSIP--class-A-(Korea)   RoHS   FCC-ClassA-US   WEEE-Mark   VCCI-classA-Japan この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されることがあります
   CCC-China   CE-EU   cUL (Canada) (Safety)   BSMI--Taiwan--EMISafety   CB-EU   

    
Physical ports
Port configuration
48 100/100/1000BAE-T and 4 1/10Gbe SFP+ ports
Management Port
Out-of-band management port (RJ-45, 10/100/1000Base-T)
Console Port
1 (RJ-45)
 Performance
Switching capacity
176Gbps
Maximum forwarding rate
131Mpps
MAC
32K
 Layer 2 Features
Switching Mode
Store-and-Forward
Spanning Tree
802.1D, 802.1w & 802.1s 
Fast Forwarding 
Edge Port 
Loop Guard 
BPDU Filter/Guard 
Auto Edge 
TCN Guard 
Root Guard
VLAN
IEEE 802.1Q Tagged Base 
Port-Based 
Private VLAN 
GVRP/GMRP 
802.1v Protocol VLAN 
Voice VLAN 
MAC-Based VLAN 
IP-Subnet VLAN 
MAC-Based Voice VLAN 
QinQ
Storm Control
Broadcast 
Unknown Multicast 
DLF (Unknown Unicast)
IGMP Snooping
v1/v2/v3 
v1/v2 Querier 
Immediate Leave
Link Aggregation
802.3ad with LACP (64 groups) 
Static Trunk 
Unicast/Multicast Traffic Balance over Trunking Port 
LACP Fallback
Link State
Port Backup
Error-Disable Recovery
 QoS Features
Scheduling for priority queue
WRR, Strict, and Hybrid
COS
802.1p, IP TOS precedence, & DSCP
DiffServ
iSCSI optimization
Auto VoIP
Port rate limit
 Security Features
static and dynamic port security (MAC-based)
802.1x
Port-based, MAC-based, auto VLAN assignment, guest VLAN, unauthenticated VLAN
Access Control List
L2/L3/L4
IPv6 ACL
L3/L4
RADIUS
Authentication and accounting
TACACS+
Authentication
HTTPS and SSL
AES128-cbc, 3ES-cbc, Blowfish-cbc
SSH 1.5/V2.0
AES128-cbc, 3ES-cbc, Blowfish-cbc
User name and password
Local Authentication, Remote Authentication via RADIUS/TACACS+, AAA
Denial of Service control
Management IP filtering
SNMP/Web/Telnet/SSH
MAC filtering
IP Source Guard
Dynamic ARP inspection (DAI)
DHCP snooping
 Layer 3 Features
IP Multinetting/CIDR
/31 subnets
Proxy ARP
IRDP
Static route
RIP v1/v2
OSPF
ECMP
BGP4
IGMP v1/v2/v3
DVMRP
PIM-DM/-SM
VRRP
Source IP configuration
Policy-based routing
 IPv6 L3 Features
RIPng
OSPFv3
MLD v1/v2
PIM-DM6/-SM6
 Management Features
Industrial command-line interface
CLI filtering
Web Based Management/HTTPs
Telenet/SSH
Software download/upload
TFTP, Xmodem, FTP, and SCP/SFTP
Configuration download/upload
TFTP, Xmodem, FTP, and SCP/SFTP
Dual Image
SNMP v1/v2c/v3
SNMP inform
v2/v3
RMON 1, 2, 3, & 9
BOOTP
client/relay
DHCP client
DHCP relay
DHCP L2 option 82 Relay
DHCP L3 option 82 Relay
EVENT/Error log
Local Flash
DDNS
DNS client
DNS relay
Remote PING
Traceroute
SNTPv4
LDAP client
LLDP
802.1ab
UDLD
Port mirroring
SPAN
sFlow v5
Cable test
Email alerting
CLI scheduler
Auto Install
 IPv6 Management
IPv4/IPv6 Dual Protocol Stack
ICMPv6
ICMPv6 Redirect
IPv6 Path MTU Discovery
IPv6 Neighbor Discovery
Stateless Autoconfiguration
Manual Configuration
DHCPv6
SNMP over IPv6
HTTP over IPv6
SSH over IPv6
IPv6 Telnet Support
IPv6 DNS Resolver
IPv6 RADIUS Support
IPv6 TACACS+ Support
IPv6 Syslog Support
IPv6 SNTP Support
IPv6 TFTP Support
Remote IPv6 Ping
 High Availability
Redundant power supply
1+1
 Mechanical
Dimension (HxWxD)
42.8x435x393mm
Weight
7.15kg/ 15.76lbs (NET)
 Environmental Specifications
Operating temperature
0~45°C
Operating humidity
90% maximum relative humidity
 Electrical
Power requirement
100~240VAC, 50/60Hz
Power consumption
95 watts (L2 64B line rate;10G-SR optics, 100% fan duty)
 Safety
UL, cUL, CB, BSMI, CCC
expand all EMC
CE, FCC, VCCI, MSIP, CCC, RCM, Anatel
 RoHS
Reduction of Hazardous Substances (RoHS) 6
 Supported Optics and Cables
1000BASE-T: Cat 5e 
DAC cable (SFP+): 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, and 5m 
AOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m 
1G optic (SFP, LC, 850nm, MMF): 1000BASE-SR optic 
1G optic (SFP, LC, 1310nm, SMF): 1000BASE-LR optic 
10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic 
10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic
 Order Information
T1048-LB9 (1LB9BZZ0000) (F-2-B, AC) 
T1048-LB9 (1LB9BZZ0001) (B-2-F, AC) 
PSU - Blue (1HY9ZZZ0061) (F-2-B, AC, 470W) 
PSU - Green (1HY9ZZZ002P) (B-2-F, AC, 470W)

Datasheet 2
Title Version Date Size
QCT Product Portfolio v5.0 2015/06/18 271.97KB
QuantaMesh T1048-LB9 v2 2015/07/02 609KB
Safety information 5
Title Version Date Size
Safety Information_EN for UL 2014/06/18 295KB
Safety Information_French for CUL. 2014/06/18
Safety Information_Russian_Language v1 2014/06/18
Safety Information_Simplify Chinese for CCC. 2014/06/18
Safety Information_Tranditional Chinese for BSMI. 2014/06/18
User manual 2
Title Version Date Size
QuantaMesh Switch User Guide 2014/10/31 13.36MB
QuantaMesh T1048-LB9 Installation Guide 2015/07/02 123KB
Supported Switch OS 1
Title Version Date Size
LB9 v1.4.17.00 image 1.4.17.00 2015/03/12 18.8MB

QuantaMesh T1048-LB9

1G/10G Datacenter & Enterprise-Class Ethernet switch

  • MLAG, OSPF, BGP4, ECMP
  • OpenFlow Support
  • Network Automation
  • $2,485.00

    *RRP Pricing*

    To View Channel Discounts Please Login


System Configurator